PVC Resin
PVC Resin
PVC Resin
CAS NO.:9002-86-2; 93050-82-9
Molecular Formula: (C2H3Cl)n
Molecular Weight: 62.5
Property: White powder, brilliant luster. PVC resin is the most widely raw material used in plastic production. It has good chemical stability, corrosion resistance and water resistance. It can be dissolved in acetone, hydrochloric ether, ester and some alcohol. It can offer good solubility, good electrical insulation, thermoplasticity and membrane forming capacity.
Application: Used in light industry, building material, agriculture, packaging and power fields. Also used in construction, transportation, machinery, electronics, chemical, food packaging etc,.
Packing: 25kg per bag compound with plastic, or as client’s request
Storage: Should be stored in dry and well-ventilated storehouse, and avoid direct sunlight.
Specification:
| Type | SG1 | SG2 | SG3 | SG4 | SG5 | SG6 | SG7 | SG8 |
| K value | 77-75 | 74-73 | 72-71 | 70-69 | 68-66 | 65-63 | 62-60 | 59-55 |
| Viscosity, ml/g | 156-144 | 143-136 | 135-127 | 126-119 | 118-107 | 106-96 | 95-87 | 86-73 |
|
Average polymerization |
1350-1250 | 1250-1150 | 1100-1000 | 950-850 | 950-850 | 750-650 | ||
|
Number of impurity particle≤ |
30 | 30 | 30 | 30 | 30 | 30 | 40 | 40 |
|
Volatiles content %,≤ |
0.40 | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 |
|
Appearing density g/ml≥ |
0.42 | 0.42 | 0.42 | 0.42 | 0.42 | 0.45 | 0.45 | 0.45 |
|
Residual after sieve 0.25mm mesh≤ |
2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 |
| 0.063mm l≥ | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 |
|
Number of grain/400cm2≤ |
40 | 40 | 40 | 40 | 40 | 40 | 40 | 40 |
|
Plasticizer absorbency value of 100g resin |
25 | 25 | 25 | 22 | 19 | 16 | 14 | 14 |
| Whiteness %,≥ | 74 | 74 | 74 | 74 | 74 | 74 | 70 | 70 |
|
Residual chlore thylene content mg/kg≤ |
5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
|
Ethylidene chloride mg/kg≤ |
150 | 150 | 150 | 150 | 150 | 150 | 150 | 150 |
SG-1
is used in producing high-grade electrical insulating material.
SG-2 is used in producing electrical insulating material, common soft products and film.
SG-3 is used in producing electrical insulating materials, agricultural film, daily-use plastic products.
SG-4 is used in producing membranelle for industrial and civil use, tube and pipes.
SG-5 is used in producing transparent products section bar, hard tube and decorative materials.
SG-6 is used in producing clear foil, hard board and welding rod.
SG-7, SG-8 is used in producing clear foil, hard injection molding.
